3-73. WATER PUMP INLET HOSE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Manual References
TM 9-2320-387-24P
Equipment Condition
Cooling system drained (para. 3-61).
Maintenance Level
Unit
1.
Loosen two clamps (2) and remove water pump inlet hose (3) from water pump (1) and lower tube
assembly (4).
2.
Remove two clamps (2) from hose (3).
1.
Install two clamps (2) on water pump inlet hose (3).
2.
Install hose (3) on lower tube assembly (4) and water pump (1) and tighten two clamps (2) to
90-125 lb-in. (10-14 N•m).
b. Installation
a. Removal
TM 9-2320-387-24-1
Change 1
3-129
FOLLOW-ON TASK: Fill cooling system (para. 3-61).
1
2
3
2
4
