3-67. SURGE TANK-TO-WATER CROSSOVER VENT HOSE REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
1.
Loosen two clamps (2) and remove vent hose (3) from water crossover (4) and surge tank (1).
2.
Remove two clamps (2) from vent hose (3).
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Manual References
TM 9-2320-387-24P
Equipment Condition
Cooling system depressurized (para. 3-61).
Maintenance Level
Unit
b. Installation
1.
Install two clamps (2) on vent hose (3).
2.
Install vent hose (3) on surge tank (1) and water crossover (4) and tighten two clamps (2) to
10-20 lb-in. (1-2 N•m).
TM 9-2320-387-24-1
3-122
Change 1
FOLLOW-ON TASK: Tighten coolant filler cap (para. 3-61).
1
2
3
2
4
