3-68. THERMOSTAT BYPASS HOSE REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
1.
Loosen two clamps (2) and remove thermostat bypass hose (3) from water pump (4) and water
crossover (1).
2.
Remove two clamps (2) from hose (3).
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Manual References
TM 9-2320-387-24P
Equipment Condition
Cooling system drained, as required (para. 3-61).
Maintenance Level
Unit
b. Installation
1.
Install two clamps (2) on thermostat bypass hose (3).
2.
Install hose (3) on water pump (4) and water crossover (1) and tighten two clamps (2).
TM 9-2320-387-24-1
Change 1
3-123
FOLLOW-ON TASK: Fill cooling system (para. 3-61).
1
2
3
2
4
