3-64. RADIATOR SUPPORTS REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
1.
Remove two locknuts (1), large washers (2), bracket (3) (left side), brackets (4), support brackets (7),
and insulators (6) from radiator studs (5). Discard locknuts (1).
2.
Remove four locknuts (11), washers (9), capscrews (8), and two support brackets (7) from airlift
brackets (10). Discard locknuts (11).
1.
Install two support brackets (7) on airlift brackets (10) with four capscrews (8), washers (9), and
locknuts (11). Do not tighten locknuts (11).
2.
Install two brackets (4), insulators (6), support brackets (7), and bracket (3) (left side) on two
radiator studs (5) with large washers (2) and locknuts (1). Tighten locknuts (1) to 20 lb-ft (27 N•m).
3.
Tighten four locknuts (11) to 26 lb-ft (35 N•m).
b. Installation
a. Removal
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Six locknuts (Appendix G, Item 155)
Manual References
TM 9-2320-387-24P
Equipment Condition
•Left splash shield removed (para. 10-23).
•Right splash shield removed (para. 10-24).
Maintenance Level
Unit
TM 9-2320-387-24-1
Change 1 3-119
FOLLOW-ON TASKS: • Install left splash shield (para. 10-23).
• Install right splash shield (para. 10-24).
