TM 9-2320-362-14&P
4-18. EES KIT INSTALLATION (Cont’d)
WARNING
When drilling, be sure to wear goggles for eye
protection or injury to personnel may occur.
10. Place hole (3) in EES kit template (6) over rivet on engine access
cover (2).
Using a 13/64-inch drill bit, drill holes (4) and (5) through
access cover (2) and insulation.
11. Remove EES kit template (6) and using a 13/64-inch drill bit,
rivet from engine access cover (2). Retain backup washer (1)
tach/hourmeter box installation.
engine
drill out
for use on
4-44
