a. Removal
b. Installation
TM 9-2320-280-20-3
12-169. REAR BUMPER INNER MOUNTING BRACKET REPLACEMENT (L119)
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
M1097, M1097A1, M1097A2
TM 9-2320-280-10
Tools
TM 9-2320-280-24P
General mechanic’s tool kit:
Equipment Condition
automotive (Appendix B, Item 1)
Pioneer tool stowage rack removed
Materials/Parts
(TM 9-2320-280-10).
Six locknuts (Appendix G, Item 79)
1. Remove two locknuts (7), washers (8), capscrews (1), and washers (2) from inner mounting
bracket (10) and bumper (13). Discard locknuts (7).
2. Remove four locknuts (11), washers (12), capscrews (4), washers (3), inner mounting bracket (10),
and spacers (9) and (6) from frame (5).
1. Install inner mounting bracket (10) and spacers (9) and (6) on frame (5) with four washers (3),
capscrews (4), washers (12), and locknuts (11). Tighten locknuts (11) to 90 lb-ft (122 N•m).
2. Install inner mounting bracket (10) on bumper (13) with two washers (2), capscrews (1), washers (8),
and locknuts (7). Tighten locknuts (7) to 90 lb-ft (122 N•m).
FOLLOW-ON TASK: Install pioneer stowage rack (TM 9-2320-280-10).
12-262
