12-259
a. Removal
b. Installation
TM 9-2320-280-20-3
12-166. REAR BUMPER OUTER BRACE REPLACEMENT (L119)
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Materials/Parts
M1097, M1097A1, M1097A2
Three locknuts (Appendix G, Item 79)
Tools
Manual References
General mechanic’s tool kit:
TM 9-2320-280-24P
automotive (Appendix B, Item 1)
1. Remove locknut (7), washer (8), capscrew (10), and washer (9) from outer brace (4) and frame (11).
Discard locknut (7).
2. Remove two locknuts (2), washers (3), capscrews (6), washers (5), and outer brace (4) from outer
mounting bracket (1). Discard locknuts (2).
1. Install outer brace (4) on outer mounting bracket (1) with two washers (5), capscrews (6),
washers (3), and locknuts (2). Tighten locknuts (2) to 90 lb-ft (122 N•m).
2. Install outer brace (4) on frame (11) with washer (9), capscrew (10), washer (8), and locknut (7).
Tighten locknut (7) to 90 lb-ft (122 N•m).
