a. Removal
b. Installation
TM 9-2320-280-20-3
12-168. REAR BUMPER INNER BRACE REPLACEMENT (L119)
This task covers:
a. Removal
b. Installation
lNITIAL SETUP:
Applicable Models
M1097, M1097A1, M1097A2
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item
Materials/Parts
1)
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
• Pioneer tool stowage rack removed
(TM 9-2320-280-10).
• Pioneer tool stowage rack latch strike removed
Three locknuts (Appendix G, Item 79)
(para. 12-170).
1. Remove locknut (5), washer (4), capscrew (8), and washer (7) from inner brace (9) and frame (6).
Discard locknut (5).
2. Remove two locknuts (3), washers (2), capscrews (10), washers (11), and inner brace (9) from brace
bracket (1). Discard locknuts (3).
1. Install inner brace (9) on brace bracket (1) with two washers (11), capscrews (10), washers (2), and
locknuts (3). Tighten locknuts (3) to 90 lb-ft (122 N•m).
2. Install inner brace (9) on frame (6) with washer (7), capscrew (8), washer (4), and locknut (5).
Tighten locknut (5) to 90 lb-ft (122 N•m).
FOLLOW-ON TASKS: • Install pioneer tool stowage rack latch strike (para. 12-170).
• Install pioneer tool stowage rack (TM 9-2320-280-10).
12-261
