b. Installation
a. Removal
TM 9-2320-280-20-3
12-167. REAR BUMPER OUTER MOUNTING BRACKET REPLACEMENT (L119)
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
M1097, M1097A1, M1097A2
TM 9-2320-280-24P
Tools
Equipment Condition
General mechanic’s tool kit:
Rear tiedown bracket removed (para 12-172).
automotive (Appendix B, Item 1)
Materials/Parts
Six locknuts (Appendix G, Item 79)
1. Remove two locknuts (2), washers (3), capscrews (7), and washers (6) from outer mounting
bracket (1) and outer brace (9). Discard locknuts (2).
2. Loosen locknut (8) from outer brace (9) and frame (10).
3. Remove four locknuts (11), washers (12), capscrews (4), washers (5), outer mounting bracket (1) and
spacer (13) from frame (10). Discard locknuts (11).
1. Install outer mounting bracket (1) and spacer (13) on frame (10) with four washers (5),
capscrews (4), washers (12), and locknuts (11). Tighten locknuts (11) to 90 lb-ft (122 N•m).
2. Install outer mounting bracket (1) on outer brace (9) with two washers (6), capscrews (7), washers (3),
and locknuts (2). Tighten locknuts (2) to 90 lb-ft (122 N•m).
3. Tighten locknut (8) on outer brace (9) to 90 lb-ft (122 N•m).
FOLLOW-ON TASKS: Install rear tiedown bracket (para 12-172).
12-260
