a. Removal
b. Installation
TM 9-2320-280-20-3
12-164. REAR BUMPER REPLACEMENT (L119)
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Materials/Parts
M1097, M1097A1, M1097A2
Four locknuts (Appendix G, Item 79)
Tools
Equipment Condition
General mechanic’s tool kit:
• Towing pintle removed (para 9-12).
automotive (Appendix B, Item 1)
• Rear tiedown brackets (L119) removed
(para 12-172).
Remove four locknuts (6), washers (5), capscrews (3), washers (2), and bumper (4) from two inner
mounting brackets (1). Discard locknuts (6).
Install bumper (4) on two inner mounting brackets (1) with four washers (2), capscrews (3),
washers (5), and locknuts (6). Tighten locknuts (6) to 90 lb-ft (122 N•m).
FOLLOW-ON TASKS: • Install rear tiedown brackets (L119) (para 12-172).
• Install towing pintle (para 9-12).
12-257
