TM 9-2320-280-20-3
12-3. DEEP WATER FORDING KIT AIR INTAKE ASSEMBLY REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
All models except M966, M966A1, M1025,
TM 9-2320-280-24P
M1025A1, M1025A2, M1026, M1026A1
Equipment Condition
Tools
l Weathercap removed (para. 3-18).
General mechanic’s tool kit:
l Fuel tank vent stack tube removed (para. 12-8).
automotive (Appendix B, Item 1)
Materials/Parts
Locknut (Appendix G, Item 63)
1. Remove locknut (5), washer (3), capscrew (2), and washer (3) from air intake assembly (1) and
windshield mounting bracket (4). Discard locknut (5).
2. Loosen clamp (6) and remove air intake assembly (1) from air cleaner extension elbow (7).
b. Installation
1. Install air intake assembly (1) into air cleaner extension elbow (7) with clamp (6). Tighten clamp (6)
to 45-50 lb-in. (5-6 N.m).
2. Install air intake assembly (1) on windshield mounting bracket (4) with washer (3), capscrew (2),
washer (3), and locknut (5). Tighten capscrew (2) to 43 lb-ft (58 N.m).
FOLLOW-ON-TASKS:
12-4
l Install weather cap (para. 3-18).
. Install fuel tank vent stack tube (para. 12-8).
