TM 9-2320-280-20-3
11-118. SHELTER CARRIER TAlLGATE BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Applicable Models
Manual References
M1037, M1042, M1097, M1097A1, M1097A2
TM 9-2320-280-24P
Tools
Equipment Condition
General mechanic’s tool kit:
Shelter carrier tailgate removed (para. 11-117).
automotive (Appendix B, Item 1)
Materials/Parts
Four locknuts (Appendix G, Item 83)
NOTE
The procedure for replacement of right and left tailgate brackets is
basically the same. This procedure covers the right bracket.
a. Removal
1. Remove locknut (7), washer (6), capscrew (5), and washer (6) from tailgate bracket (8) and shelter
support assembly (3). Discard locknut (7).
2. Remove three locknuts (4), washers (2), capscrews (1), washers (2), and tailgate bracket (8) from
shelter support assembly (3). Discard locknuts (4).
b. Installation
1. Install tailgate bracket (8) on shelter support assembly (3) with three washers (2), capscrews (1),
washers (2), and locknuts (4).
2. Secure tailgate bracket (8) to shelter support assembly (3) with washer (6), capscrew (5), washer (6),
and locknut (7). Tighten locknut (7) to 65 lb-ft (88 N-m). Tighten capscrews (1) to 26 lb-ft (35 N-m).
FOLLOW-ON TASK: Install shelter carrier tailgate (para. 11-117).
11-165
