TM 9-2320-280-20-3
11-120. SHELTER REPLACEMENT (Contd)
4. Install rear of shelter (3) on support assembly (4) with two reinforcements (9), four washers (10),
lockwashers (11), and capscrews (12). DO not tighten capscrews (12).
5.
6.
Add shims (7), as necessary, to rear shelter mounts to ensure snug fit between mounting brackets (6)
and support assembly (4). Tighten capscrews (12) to 90 lb-ft (122 N-m) and capscrews (8) to 60 lb-ft
(81 N.m).
Disconnect lifting
FOLLOW-ON TASK: Raise and secure tailgate (TM 9-2320-280-10).
11-169