TM 9-2320-280-20-3
11-115. SHELTER SUPPORT REINFORCEMENT REPLACEMENT
I
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
M1037, M1042, M1097, M1097A1, M1097A2
TM 9-2320-280-10
TM 9-2320-280-24P
Tools
General mechanics tool kit:
Equipment Condition
automotive (Appendix B, Item 1)
Tailgate lowered (TM 9-2320-280-10).
Materials/Parts
Two capscrews (Appendix G, Item 11)
Two lockwashers (Appendix G, Item 128)
NOTE
It maybe necessary to detach cab rear panel straps and
turnbuttons and roll cab rear panel upward to gain access to front
support reinforcements.
Remove two capscrews (7), lockwashers (6), washers (5), reinforcement (4), and shims (3) (if installed)
from mounting bracket (2). Discard capscrews (7) and lockwashers (6).
b. Installation
NOTE
Ensure correct positioning of shims, if installed, upon installation
of capscrews.
Install shims (3) (if installed) and reinforcement (4) on support assembly (1) and mounting bracket (2)
with two capscrews (7), lockwashers (6), and washers (5). Tighten capscrews (7) to 90 lb-ft (122 N=m).
FOLLOW-ON TASK: Raise and secure tailgate (TM 9-2320-280-10).
11-162
