TM 9-2320-280-20-3
11-121. SHELTER SUPPORT ASSEMBLY REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
M1037, M1042, M1097, M1097A1, M1097A2
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
locknut (Appendix G, Item 58)
Thirteen locknuts (Appendix G, Item 70)
Four locknuts (Appendix G, Item 79)
Three locknuts (Appendix G, Item 84)
Personnel Required
One mechanic
One assistant
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
l Shelter carrier tailgate brackets removed
(para. 11-118).
l Cab enclosure panels removed (para. 11-122).
l Fuel filler housing removed (para. 10-2).
l Rear soft top curtain rolled up (TM 9-2320-280-10).
l Shelter removed (pars. 11-120).
a. Removal
1.
2.
3.
4.
5.
6.
7.
8.
Remove two locknuts (24), washers (2), capscrews (4), washers (5), and spacers (6) from support
assembly (27) and cargo floor (22). Discard locknuts (24)
Remove six locknuts (24), washers (2), reinforcement plates (23) and (25), six capscrews (3),
washers (2), and spacers (1) from support assembly (27) and “B” beam (26). Discard locknuts (24).
Remove two locknuts (21), washers (7), capscrews (9), and washers (10) from support
assembly (27) and cargo floor (22). Discard locknuts (21).
Remove locknut (34), washer (33), capscrew (29), washer (30), clamp (32), and fuel filler spout (28)
from body (31) and pull fuel filler spout (28) away for access to locknut (21). Discard locknut (34).
Remove two locknuts (21), washers (7), capscrews (8), and washers (7) from support assembly (27)
and cargo floor (22). Discard locknuts (21).
Remove four locknuts (19), washers (14), capscrews (13), and washers (14) from support assembly
and cargo floor (22). Discard locknuts (19).
Remove three locknuts (20), washers (15), capscrews (16), and washers (15) from support
assembly (27) and “D” beam (17). Discard locknuts (20).
Remove locknut (18), washer (12), capscrew (11), washer (12), and support assembly (27)
from cargo floor (22) and “D” beam (17). Discard locknut (18).
1. Install support assembly (27) on cargo floor (22) and “D” beam (17) with washer (12), capscrew (11),
washer (12), and locknut (18).
2. Secure support assembly (27) to “D” beam (17) with three washers (15), capscrews (16),
washers (15), and locknuts (20).
3. Secure support assembly (27) to cargo floor (22) with four washers (14), capscrews (13),
washers (14), and locknuts (19).
4. Secure support assembly (27) to cargo floor (22) with two washers (7), capscrews (8), washers (7),
and locknuts (21).
5. Install support assembly (27) on “B” beam (26) with six spacers (1), washers (2), capscrews (3), two
reinforcement plates (23) and (25), six washers (2), and locknuts (24).
11-170
