TM 9-2320-280-20-3
11-107. TRIPLE AMMO BOX TRAY (40 MM) REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Personnel Required
M1025, M1025A1, M1025A2, M1026,
One mechanic
M1026A1, M1043, M1043A1, M1043A2,
One assistant
M1044, M1044A1
Manual References
Tools
TM 9-2320-280-10
General mechanics tool kit:
TM 9-2320-280-24P
automotive (Appendix B, Item 1)
Equipment Condition
Materials/Parts
Rear end of cargo shell door raised
Six locknuts (Appendix G, Item 58)
(TM 9-2320-280-10).
1. Remove three locknuts (8), washers (2), capscrews (3), and washers (2) from ammo box tray (1) and
cargo floor (9). Discard locknuts (8).
2. Remove three locknuts (7), washers (4), reinforcement brackets (6), capscrews (5), washers (4), and
ammo box tray (1) from cargo floor (9). Discard locknuts (7).
I
b. Installation
1. Install ammo box tray (1) on cargo floor (9) with three washers (4), capscrews (5), reinforcement
brackets (6), washers (4), and locknuts (7).
2. Secure ammo box tray (1) to cargo floor (9) with three washers (2), capscrews (3), washers (2), and
locknuts (8). Tighten capscrews (3) and (5) to 6 lb-ft (8 N.m).
FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-280-10).
11-149
