TM 9-2320-280-20-3
I
11-105. AMMO BOX TRAY (40 MM AND CALIBER .50) REPLACEMENT
I
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Applicable Models
M1025, M1025A1, M1025A2, M1026,
M1026A1, M1043, M1043A1, M1043A2,
M1044, M1044A1
Tools
General mechanic’s tool kit
automotive (appendix B, item 1)
Matenals/Parta
Four locknuts (Appendix G, Item 58)
Peraonne[ Required
One mechanic
One assistant
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
Rear end of cargo shell door raised
(TM 9-232O-28O-1O).
I
a. Removal I
1. Remove locknut (7), washer (2), reinforcement bracket (8), capscrew (3), and washer (2) from
ammo box tray (1) and cargo floor (9). Discard locknut (7).
2. Remove three locknuts (6), washera (5), capscrews (4), washera (5), and ammo box tray (1)
from cargo floor (9). Discard locknuts (6).
I
b. Installation
I
NOTE
Longer capscrews go in right side mounting holes.
1.
2.
Install ammo box tray (1) on cargo floor (9) with washer (2), capscrew (3), retiorcement bracket (8),
washer (2), and locknut (7).
Secure ammo box tray (1) to cargo floor (9) with three washers (5), capscrews (4),
locknuts (6). Tighten capscrews (4) and (3) to 6 lb-fi (8 N.m).
washers (5), and
FOLLOW-ON TASK Close cargo shell door (TM 9-2320-280-10).
11”147
