TM 9-2320-280-20-3
11-108. WATER CAN TRAY REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
M1025, M1025A1, M1025A2, M1026,
TM 9-2320-280-10
M1026A1, M1043, M1043A1, M1043A2,
TM 9-2320-280-24P
M1044, M1044A1
Equipment Condition
Tools
Rear of cargo shell door raised
General mechanic’s tool kit:
(TM 9-2320-280-10).
automotive (Appendix B, Item 1)
Personnel Required
One mechanic
One assistant
NOTE
For M1025; M1025A1, M1025A2, M1026, and M1026A1 vehicles,
go to step 2.
1. Remove four screws (2), washers (3), and water can tray (1) from cargo floor (5).
2. Remove three screws (2), washers (3), and water can tray (1) from cargo floor (5).
3. Inspect rivnuts (4) for damage. Replace if damaged.
b. Installation
NOTE
For M1025, M1025A1, M1025A2, M1026, and M1026A1 vehicles,
go to step 2.
1. Install water can tray (1) on cargo floor (5) with four washers (3) and screws (2). Tighten screws (2)
to 6 lb-ft (8 N.m).
2. Install water can tray (1) on cargo floor (5) with three washers (3) and screws (2). Tighten screws (2)
to 6 lb-ft (8 N=m).
FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-280-10).
11-150
