TM 9-2320-280-20-3
I
11-103. DOUBLE AMMO BOX TRAY (CALIBER .50) REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Applicable Models
M1025, M1025A1, M1025A2, M1026,
M1026A1, M1043, M1043A1, M1043A2,
M1044, M1044A1
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Four locknuts (Appendix G, Item 58)
Personnel Required
One mechanic
One assistant
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
Rear end of cargo shell door raised
(TM 9-2320-280-10).
1. Remove two locknuts (9), washers (2), capscrews (3), and washers (2) from ammo box tray (1) and
wheelhouse (6). Discard locknuts (9).
2. Remove two locknuts (8), washers (5), reinforcement brackets (7), capscrews (4), washers (5), and
ammo box tray (1) from wheelhouse (6). Discard locknuts (8).
1. Install ammo box tray (1) on wheelhouse (6) with two washers (5), capscrews (4), reinforcement
brackets (7), washers (5), and locknuts (8).
2. Secure ammo box tray (1) to wheelhouse (6) with two washers (2), capscrews (3), washers
locknuts (9). Tighten locknuts (9) and (8) to 6 lb-ft (8 N-m).
(2), and
FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-280-10).
11-145
