11-91. RIFLE MOUNTING CLAMP REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
Remove two locknuts (2), washers (3), screws (4), washers (3), and clamp (5) from clamp bracket (1).
Discard locknuts (2).
INITIAL SETUP:
Applicable Models
All models except M996, M996A1, M997,
M997A1, M997A2, M998, M998A1, M1035,
M1035A1, M1035A2, M1037, M1038,
M1038A1, M1042, M1097, M1097A1,
M1097A2, M1123
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two locknuts (Appendix G, Item 82)
Two locknuts (new configuration)
(Appendix G, Item 83)
Manual References
TM 9-2320-280-24P
b. Installation
Install clamp (5) on clamp bracket (1), with moveable finger (6) inboard, with two washers (3),
screws (4), washers (3), and locknuts (2).
NOTE
• Procedures for replacing the left and right rifle mounting clamps
are basically the same. This procedure covers the right rifle
mounting clamp.
• Vehicle may be equipped with new rifle mounting clamp bracket
configuration for M16 rifle or M203 grenade launcher.
TM 9-2320-280-20-3
Change 1 11-133
