TM 9-2320-280-20-3
11-95. GUN ADAPTER PLATE ASSEMBLY REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Peraonnel Required
M1043, M1043A1, M1043A2, M1044,
One mechanic
M1044A1
One assistant
Tools
Manual References
General mechanic’s tool kit:
TM 9-2320-280-24P
automotive (Appendix B, Item 1)
Materials/Parts
Two locknuts (Appendix G, Item 58)
1. Remove two capscrews (2) and washers (1) from adapter plate (5) and cargo floor (11).
2. Remove locknut (14), washer (4), capscrew (3), and washer (4) from adapter plate (5) and cargo
floor (11). Discard locknut (14).
3. Remove locknut (12), washer (6), reinforcement bracket (13), capscrew (7), and washer (6) from
adapter plate (5) and cargo floor (11). Discard locknut (12).
4. Remove capscrew (8), washer (9), adapter plate (5), and cargo tiedown (10) from cargo floor (11).
b. Installation
1.
2.
3.
4.
5.
Install cargo tiedown (10) and adapter plate (5) on cargo floor (11) with washer (9) and capscrew (8).
Install adapter plate (5) on cargo floor (11) with washer (6), capscrew (7), reinforcement bracket (13),
washer (6), and locknut (12).
Secure adapter plate (5) to cargo floor (11) with washer (4), capscrew (3), washer (4), and
locknut (14).
Secure adapter plate (5) to cargo floor (11) with two washers (1) and capscrews (2).
Tighten capscrews (2), (7), and (3) to 6 lb-ft (8 N.m). Tighten capscrew (8) to 75 lb-ft (102 Nom).
11-137
