TM 9-2320-280-20-3
I
11-87. LAUNCH TUBE STOWAGE BRACKETS REPLACEMENT
This task covers:
a. Removal
b. Installation
lNITIAL SETUP:
Applicable Models
Manual References
M966, M966A1, M1036, M1045, M1045A1,
TM 9-2320-280-10
M1045A2, M1046, M1046A1
TM 9-2320-280-24P
Tools
Equipment Condition
General mechanic’s tool kit
Rear end of cargo shell
automotive (Appendix B, Item 1)
(TM 9-2320-280-10).
Materials/Parts
Sealing compound (Appendix C, Item 45)
Four lockwashers (Appendix G, Item 109)
Two cotter pins (Appendix G, Item 22)
Four locknuts (Appendix G, Item 63)
door raised
1. Remove two cotter pins (5), pins (8), and strap (6) from front launch tube bracket (7) Discard cotter
pins (5).
2. Remove four locknuts (4), washers (3), front launch tube bracket (7), and plate (2) from cargo
door (1). Discard locknuts (4).
3. Remove four capscrews (9), lockwashers (10), and rear launch tube bracket (11) from cargo
door (1). Discard lockwashers (10).
1. Apply sealing compound to threads of four capscrews (9). Install rear launch tube bracket (11) on
cargo door (1) with four lockwashers (10) and capscrews (9). Tighten capscrews (9) to 10 lb-ft (14 Nom)”
2. Install plate (2) and front launch tube bracket (7) on cargo door (1) with four washers (3) and
locknuts (4). Tighten locknuts (4) to 10 lb-ft (14 N-m).
3. Install strap (6) on front launch tube bracket (7) with two pins (8) and cotter pins (5).
FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-280-10).
11-129
