11-90. RIFLE SUPPORT REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
Remove three locknuts (5), washers (2), capscrews (1), washers (2), and rifle support (3) from floor
panel (4). Discard locknuts (5).
INITIAL SETUP:
Applicable Models
All models except M996, M996A1, M997,
M997A1, M997A2, M998, M998A1, M1035,
M1035A1, M1035A2, M1037, M1038,
M1038A1, M1042, M1097, M1097A1,
M1097A2, M1123
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Three locknuts (Appendix G, Item 65)
Personnel Required
One mechanic
One assistant
Manual References
TM 9-2320-280-24P
b. Installation
Install rifle support (3) on floor panel (4) with three washers (2), capscrews (1), washers (2), and
locknuts (5). Tighten locknuts (5) to 12-17 lb-ft (16-23 N•m).
TM 9-2320-280-20-3
11-132
Change 1
