TM 9-2320-280-20-3
11-80. FUEL CAN TRAY AND HOSE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
M966, M966A1, M1036, M1045, M1045A1,
TM 9-2320-280-10
M1045A2, M1046, M1046A1
TM 9-2320-280-24P
Tools
Equipment Condition
General mechanic’s tool kit:
Rear of cargo shell door raised
automotive (Appendix B, Item 1)
(’I’M 9-2320-280-10).
Materials/Parts
Screw (Appendix G, Item 208)
1. Remove screw (8) and hose clamp (6) from frame (5) and remove hose (7) from fuel can tray (3).
Discard screw (8).
2. Remove four screws (1), washers (2), and fuel can tray (3) from cargo floor (4).
b. Installation
1.
2.
3.
Install fuel can tray (3) on cargo floor (4) with four washers (2) and screws (1).
6 lb-ft (8 Nom).
Connect hose (7) to fuel can tray (3).
Install hose (7) on frame (5) with clamp (6) and screw (8). Tighten screw (8) to
Tighten screws (
7 lb-ft (10 N.m).
1) to
FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-280-10).
11-122
