TM 9-2320-280-20-3
11-81. DAY SIGHT STOWAGE BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
M966, M966A1, M1036, M1045, M1045A1,
M1045A2, M1046, M1046A1
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1))
Materials/Parts
Detergent (Appendix C, Item 17)
Four locknuts (Appendix G, Item 58)
Seven locknuts (Appendix G, Item 62)
Personnel Required
One mechanic
One assistant
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
Rear end of cargo shell door raised
(TM 9-2320-280-10).
1. Remove four locknuts (6), washers (5), capscrews (10), and bracket (2) from cargo floor (9). Discard
locknuts (6).
2. Remove seven locknuts (3), washers (4), capscrews (8), and two pads (1) from bracket (2). Discard
locknuts (3).
3. Inspect four spacers (7) in cargo floor (9) for damage. Replace any spacer (7) if damaged.
b. Installation
1. Lubricate pads (1) with detergent and install on bracket (2) with seven capscrews (8), washers (4),
and locknuts (3). Tighten locknuts (3) to 6 lb-ft (8 Nom).
2. Install bracket (2) on cargo floor (9) with four capscrews (10), washers (5), and locknuts (6).
Tighten locknuts (6) to 6 lb-ft (8 N-m).
FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-280-10).
11-123
