TM 9-2320-280-20-3
11-79. TRIPOD HEAD MOUNTING BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
M966, M966A1, M1036, M1045, M1045A1,
TM 9-2320-280-10
M1045A2, M1046, M1046A1
TM 9-2320-280-24P
Tools
Equipment Condition
General mechanic’s tool kit:
l Rear end of cargo shell door raised
automotive (Appendix B, Item 1)
(TM 9-2320-280-10).
c Tailgate lowered (TM 9-2320-280-10).
Materials/Parts
Three locknuts (Appendix G, Item 58)
NOTE
On M1045, M1045A1, M1045A2, M1046, and M1046A1 models, there is an
additional washer between the wheelhouse and the wheelhouse armor.
1. Remove three locknuts (7), washers (6), and plate assembly (5) from wheelhouse (8). Discard
locknuts (7).
2. Remove three capscrews (1), washers (2), tripod head bracket (3), and three spacers (4) from
wheelhouse (8)
I
b. Installation
1. Install three spacers (4) and tripod head bracket (3) on wheelhouse (8) with three washers (2) and
capscrews (1).
2. Install plate assembly (5) on wheelhouse (8) with three washers (6) and locknuts (7). Tighten
locknuts (7) to 6 lb-ft (8 Nom).
FOLLOW-ON TASKS: . Raise and secure tailgate (TM 9-2320-280-10).
l Close cargo shell door (TM 9-2320-280-10).
11-121
