TM 9-2320-280-20-3
11-76. WATER CAN BUMPER REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
M966, M966A1, M1036, M1045, M1045A1,
TM 9-2320-280-10
M1045A2, M1046, M1046A1
TM 9-2320-280-24P
Tools
Equipment Condition
General mechanics tool kit
Rear end of cargo shell door raised
automotive (Appendix B, Item 1)
(TM 9-2320-280-10).
Materials/Parts
TWO locknuts (Appendix G, Item 58)
Remove two locknuts (2), washers (3), capscrews (6), washers (3), water can bumper (5), and water can
bumper bracket (4) from MGS battery rack assembly (1). Discard locknuts (2).
b. Installation
Install water can bumper bracket (4) and water can bumper (5) on MGS battery rack assembly (1) with
two washers (3), capscrews (6), washers (3), and locknuts (2). Tighten locknuts (2) to 6 lb-ft (8 Nom).
FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-280-10).
11-117