TM 9-2320-280-20-3
11-78. TRIPOD LEG MOUNTING BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
lNITIAL SETUP:
Applicable Models
M966, M966A1, M1036, M1045, M1045A1,
M1045A2, M1046, M1046A1
Tools
General mechanic’s tool kit
automotive (Appendix B, Item 1)
Materials/Parts
Three locknuts (Appendix G, Item 58)
Personnel Required
One mechanic
One assistant
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
. Rear end of cargo shell door raised
(TM 9-2320-280-10).
. Pioneer tool rack removed (TM 9-2320-280-10).
1. Remove three locknuts (9), washers (5), capscrews (6), washers (5), tripod leg bracket (4), and
spacers (10) from cargo floor (7). Discard locknuts (9).
2. Remove two nuts (11), washers (2), capscrews (1), washers (2), strap bracket (8), and strap (3) from
tripod leg bracket (4).
b. Installation
1. Install strap bracket (8) and strap (3) on tripod leg bracket (4) with two washers (2), capscrews (1),
washers (2), and nuts (11).
2. Install three spacers (10) and tripod leg bracket (4) on cargo floor (7) with three washers (5),
capscrews (6), washers (5), and locknuts (9).
3. Tighten front and rear locknuts (9) and center capscrew (6) to 6 lb-ft (8 N-m).
FOLLOW-ON TASKS: . Close cargo shell door (TM 9-2320-280-10).
l Install pioneer tool rack (TM 9-2320-280-10).
11-120
