TM 9-2320-280-20-3
11-64. GUNNER’S PLATFORM ASSEMBLY MAINTENANCE
This task covers:
a Disassembly
b. Assembly
lNITIAL SETUP:
Applicable Models
All models except M996, M996A1, M997,
M997A1, M997A2, M998, M998A1, M1035,
M1035A1, M1035A2, M1037, M1038, M1038A1,
M1042, M1097, M1097A1, M1097A2
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Five locknuts (Appendix G, Item 80)
Personnel Required
One mechanic
One assistant
Manual References
TM 9-2320-280-24P
Equipment Condition
l Gunner’s platform removed (para. 11-63).
l Gunner’s platform assembly removed
(para. 11-65).
& Disassembly
1. Remove two nuts (5), washers (4), shoulder bolts (2), and outer risers (3) from rear mounting
bracket (6).
2. Remove riser assembly (1) from front mounting bracket (7).
3. Remove two nuts (9), washers (10), capscrews (17), spacers (12), outer risers (3), and latches (18)
from inner risers (11).
4. Remove two nuts (13), washers (14), capscrews (16), and two pin-and-lanyard assemblies (15) from
outer risers (3).
5. Remove four nuts (24), washers (23), capscrews (19), and inner risers (11) from stiffener plate (8).
6. Remove two nuts (20), washers (21), and guide pin bolts (22) from inner risers (11).
11-86
