TM 9-2320-280-20-3
11-65. GUNNER’S PLATFORM ASSEMBLY REPLACEMENT
This task covers:
a. Removal
b. Installation
lNITIAL SETUP:
Applicable Models
Materials/Parts
All models except M996, M996A1, M997,
Five locknuts (Appendix G, Item 80)
M997A1, M997A2, M998, M998A1, M1035,
M1035A1, M1035A2, M1037, M1038, M1038A1,
Personnel Required
M1042, M1097, M1097A1, M1097A2
One mechanic
One assistant
Tools
General mechanic’s tool kit:
Manual References
automotive (Appendix B, Item 1)
TM 9-2320-280-24P
a. Removal
1. Remove two locknuts (11), washers (9), reinforcement brackets (10), capscrews (8), and washers (9)
from front gunner’s platform bracket (7) and cargo floor (5). Discard locknuts (11).
2. Remove three locknuts (6), washers (3), capscrews (2), washers (3), gunner’s platform assembly (1), and
rear gunner’s bracket (4) from cargo floor (5). Discard locknuts (6).
b. Installation
1. Install gunner’s platform assembly (1) and rear gunner’s platform bracket (4) on cargo floor with
three washers (3), capscrews (2), washers (3), and locknuts (6).
2. Install front bracket (7) on cargo floor (5) with two washers (9), capscrews (8), reinforcement
brackets (10), washers (9), and locknuts (11). Tighten capscrews (2) and (8) to 21 lb-ft (29 N.m).
11-90
