TM 9-2320-280-20-3
11-62. ARMAMENT COVER AND SEAL REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Materials/Parts
M1025, M1025A1, M1025A2, M1026, M1026A1,
Four locknuts (Appendix G, Item 106)
M1043; M1043A1, M1043A2, M1044, M1044A1
Manual References
Tools
TM 9-2320-280-24P
General mechanics tool kit:
automotive (Appendix B, Item 1)
NOTE
Note locations of capscrews for installation.
1. Remove locknut (6), washer (4), capscrew (3), and washer (4) from armament cover (5) and weapon
station (8). Discard locknut (6).
2. Remove three locknuts (7), washers (1), capscrews (2), washers (1), and armament cover (5) from
weapon station (8). Discard locknuts (7).
3. Remove seal (10) from armament cover (5). Clean armament cover (5) to remove adhesive.
b. Installation
1. Peel paper backing (9) from seal (10) and apply seal (10) to armament cover (5).
2. Install armament cover (5) on weapon station (8) with three washers (1), capscrews (2), washers (1),
and locknuts (7).
3. Secure armament cover (5) to weapon station (8) with washer (4), capscrew (3), washer (4), and
locknut (6).
4. Tighten locknut (6) to 65 lb-in. (7 N.m). Tighten locknuts (7) to 12 lb-ft (16 N-m).
11-83