TM 9-2320-280-20-3
11-66. VEHICLE POWER CONDITIONER (VPC) MOUNTING BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Materials/Parts
M966, M966A1, M1036, M1045, M1045A1,
Four locknuts (Appendix G, Item 58)
M1045A2, M1046, M1046A1
Manual References
Tools
TM 9-2320-280-24P
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Remove four locknuts (5), washers (4), screws (1), and vehicle power conditioner (VPC) mounting bracket (3)
from underside of radio rack (2). Discard locknuts (5).
I
b. Installation
Install VPC mounting bracket (3) on underside of radio rack (2) with four screws (1), washers (4), and
locknuts (5). Tighten locknuts (5) to 6 lb-ft (8 N-m).
11-91
