TM 9-2320-280-20-3
11-9. BALLISTIC CREW DOOR WINDOW STOP REPLACEMENT
I
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Materials/Parts
All models except M998, M998A1, M1035,
Three locknuts (Appendix G, Item 78)
M1035A1, M1035A2, M1037, M1038, M1038A1,
M1042, M1097, M1097A1, M1097A2
Manual References
TM 9-2320-280-24P
Tools
Gereral mechanic’s tool kit:
automotive (Appendix B, Item 1)
CAUTION
If both window stops are being replaced, ensure ballistic window is
locked in the full up position to prevent damage to window.
a. Removal
1. Remove two locknuts (2), screws (5), washers (4), and window stop bracket (6) from side rail (3).
Discard locknuts (2).
2. Remove locknut (7), washer (8), screw (1), and pad (9) from window stop bracket (6). Discard
locknut (7).
b. Installation
1. Install pad (9) on window stop bracket (6) with screw (1), washer (8), and locknut (7).
2. Install window stop bracket (6) on side rail (3) with two washers (4), screws (5), and locknuts (2).
11-16
