TM 9-2320-280-20-3
11-7. BALLISTIC CREW DOOR WINDOW ASSEMBLY MAINTENANCE
This task covers:
a. Removal
c. Assembly
b. Disassembly
d. Installation
INITIAL SETUP:
Applicable Models
All models except M998, M998A1, M1035,
M1035A1, M1035A2, M1037, M1038,
M1038A1, M1042, M1097, M1097A1, M1097A2
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Sealing compound (Appendix C, Item 43)
Retaining ring (Appendix G, Item 174)
Manual References
TM 9-2320-280-24P
Equipment Condition
l Window stops removed (para. 11-9).
l Latch tube removed (para. 11-12).
Pull out on window latch knob (4) and slide window (5) down and out from door side rails (1) and guide
channel (2).
1. Remove latch knob (4) from pin (6).
2. Remove retaining ring (9), pin (6), and spring (10) from window latch (3). Discard retaining ring (9).
3. Remove four rollers (8) from guide pins (7).
4. Remove four guide pins (7) from window (5).
1. Apply sealing compound to threads of guide pins (7) and install guide pins (7) on window (5) frame.
2. Install spring (10) and pin (6) on window latch (3) with retaining ring (9).
3. Apply sealing compound to threads of pin (6) and install latch knob (4) onto pin (6).
4. Install four rollers (8) on guide pine (7).
Align window latch (3) with window guide channel (2) and push window (5) up into guide channel (2)
and door side rails (1).
11-12
