TM 9-2320-280-20-3
11-12. BALLISTIC CREW DOOR LATCH TUBE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Materials/Parts
All models except M998, M998A1, M1035,
Capscrew (Appendix G, Item 10)
M1035A1, M1035A2, M1037, M1038,
Four screws (Appendix G, Item 209)
M1038A1, M1042, M1097, M1097A1, M1097A2
Tools
TM 9-2320-280-24P
General mechanics tool kit:
automotive (Appendix B, Item 1)
I
a Removal
1. Remove capscrew (9), wave washer (8), latch tube (7), and washer (3) from latch arm (4). Discard
capscrew (9).
2. Remove four screws (6), washers (5), and bracket (1) from side rails (2). Discard screws (6).
3. Remove two screws (12), washers (13), and guide (11) from bracket (1).
4. Slide latch tube (7) out of bracket (1).
5. Remove protector (10) from bracket (1).
b. Installation
1. Install protector (10) on bracket (1).
2. Slide latch tube (7) into bracket (1).
3. Install guide (11) on bracket (1) with two washers (13) and screws (12).
4. Install bracket (1) on side rails (2) with four washers (5) and screws (6).
5. Install washer (3) and latch tube (7) on latch arm (4) with wave washer (8) and capscrew (9).
Tighten capscrew (9) to 6 lb-ft (8 N.m).
11-19