TM 9-2320-280-20-3
11-11. BALLISTIC CREW DOOR LATCH REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Materials/Parts
All models except M998, M998A1, M1035,
Capscrew (Appendix G, Item 10)
M1035A1, M1035A2, M1037, M1038, M1038A1,
Four locknuts (Appendix G, Item 77)
M1042, M1097, M1097A1, M1097A2
Manual References
Tools
TM 9-2320-280-24P
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
1. Remove clevis clip (6) and hook (7) from paddle lock (10) and disconnect hook (7) from door
latch (14).
2. Disconnect spring (13) from top of latch (14).
3. Remove capscrew (1), wave washer (2), latch tube (3), and washer (4) from latch arm (5). Discard
capscrew (1).
4. Remove four locknuts (15), washer (8), screws (9), latch (14), and spacer (12) from crew door (11)
Discard locknuts (15).
b. Installation
1. Install spacer (12) and latch (14) on crew door (11) with four washers (8), screws (9), and locknuts (15).
Tighten locknuts (15) to 6 lb-ft (8 N=m).
2. Connect spring (13) to top of latch (14).
3. Install washer (4) and latch tube (3) on latch arm (5) with wave washer (2) and capscrew (1).
Tighten capscrew (1) to 6 lb-ft (8 N~m).
4. Install hook (7) on latch (14) and connect other end of hook (7) to paddle lock (10) with clevis clip (6).
11-18
