TM 9-2320-280-20-3
11-4. BALLISTIC CREW DOOR REAR STRIKER PLATE REPLACEMENT
I
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Materials/Parts
All models except M998, M998A1, M1035,
Tape (Appendix C, Item 50)
M1035A1, M1035A2, M1037, M1038,
M1038A1, M1042, M1097, M1097A1, M1097A2
Manual References
TM 9-2320-280-24P
Tools
Gereral mechanic’s tool kit:
automotive (Appendix B, Item 1)
Remove two capscrews (4), washers (3), and rear striker plate (2) from body (1). Remove tape from rear
striker plate (2) and discard tape.
I
b. Installation
Apply tape to rear striker plate (2) mounting surface. Install rear striker plats (2) on body (1) with two
washers (3) and capscrews (4). Tighten capscrews (4) to 8 lb-ft (11 Nom).
11-9
