TM 9-2320-280-20-3
Change 1
D-97
Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS (Cont'd)
Figure D-110. Mini-box Top Section Drill Procedure.
INSTRUCTIONS:
1.
Locate, mark, and drill thirteen 0.156-in. diameter holes (1) in mini-box top section (4).
2.
Locate, mark, and drill six 0.205-in. diameter holes (3) in mini-box top section (4).
3.
Locate, mark, and drill four 0.138-in. diameter holes (2) in mini-box top section (4).
