TM 9-2320-280-20-3
Change 1
D-79
Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS (Cont'd)
MATERIAL BLOCK
STOCK SIZE
DESCRIPTION
SPECIFICATION
14 AWG
WIRE, ELECTRICAL
MIL-C-13486
Figure D-97. Body Harness Connector Fabrication.
INSTRUCTIONS:
NOTE
When connecting electrical wires to connector pins on body harness
connector, use NSN 3439-00-133-1108 solder. (Refer to TB SIG-222
for soldering.)
1.
Cut eight sections of wire (2) to length as shown.
2.
Place grommet retaining nut (5) over eight sections of wire (2).
3.
Position eight sections of wire (2) in grommet (1).
4.
Place coupling nut (6) over plug shell assembly (7).
5.
Connect eight sections of wire (2) to receptacle pins marked A, B, C, D, E, F, G, and H on plug shell
assembly (7).
6.
Position grommet (1) in plug shell assembly (7) and secure with grommet retaining nut (5).
7.
Use wire markers (3) on eight sections of wire (2) to locate and mark wires. Secure eight sections of
wire (2) with five tiedown straps (4).
ITEM
MATERIALS
NO.
REQD
DESCRIPTION
NSN/PART NUMBER
1
1
Grommet
5365-00-772-2322
2
8
Electrical Wire: 48 in.
6145-00-152-6499
3
8
Wire Marker
46F5981
4
5
Tiedown Strap
5975-00-074-2072
5
1
Grommet Retaining Nut
5935-00-333-9414
6
1
Coupling Nut
5310-00-655-9860
7
1
Plug Shell Assembly
5935-00-686-2608