TM 9-2320-280-20-3
Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS (Cont’d)
INSTRUCTIONS:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
Disconnect battery ground cable (Refer to para. 4-73).
NOTE
Have container availabe to catch fluid drainage from hydraulic
hoses.
Remove clamp (4) and hydraulic hose (5) from elbow fitting (2).
Disconnect fan drive hydraulic hose (11) from fitting (12).
Remove elbow fitting (2) from adapter bushing (9).
Remove nut (3), washer (6), and washer (8) securing adapter bushing (9) to fan shroud (7).
Remove fan drive hydraulic hose (11) from elbow fitting (10).
Remove fitting (12) from fan drive (1).
NOTE
Apply sealing compound (appendix C, item 44) to all pipe threads
during installation.
Install hose (13) on elbow fitting (10).
Install quick-disconnect (14) on fitting (15).
Install fan drive hydraulic hose (13) in quick-disconnect (14).
Install fitting (15) in fan drive (1).
Install adapter bushing (9) and washer (8) in fan shroud (7) with washer (6) and nut (3).
Install elbow fitting (2) in adapter bushing (9).
Install hydraulic hose (5) on elbow fitting (2) with clamp (4).
Connect battery ground cable (para. 4-73).
Bleed power steering system (para. 8-29).
D-74
