5.
Remove three screws (12), clamps (11), antenna cables (4), intercom cable (16), and harness (9) from
windshield (10).
NOTE
• Perform steps 6 through 8 for old configuration.
• Perform steps 9 through 11 for new configuration.
6.
Remove nut and lockwasher assembly (13), capscrew (19), washer (18), clamp (17), antenna
cables (4), retainer (14), and grommet (15) from body (8). Discard nut and lockwasher assembly (13).
7.
Remove nut and lockwasher assembly (1), screw (3), clamp (2), and antenna cables (4) from body (8).
Discard nut and lockwasher assembly (1).
8.
Remove two capscrews (20), lockwashers (21), clamp (5), ground strap (6), and antenna cables (4)
from antenna (7) and body (8). Discard lockwashers (21).
9.
Remove two nut and lockwasher assemblies (30), capscrews (23), washers (24), clamps (25), and
antenna cables (4) from reinforcement (22). Discard nut and lockwasher assemblies (30).
10.
Remove two nut and lockwasher assemblies (29), capscrews (26), washers (27), clamps (28), and
antenna cables (4) from body (8). Discard nut and lockwasher assemblies (29).
11.
Remove two nut and lockwasher assemblies (13), capscrews (19), grommet (15), retainer (14),
intercom cable (16), and antenna cables (4) from body (8). Discard nut and lockwasher
assemblies (13).
12.
Remove two antenna cables (4) from antenna (7).
4-106. ANTENNA CABLES REPLACEMENT (M997, M997A1, M997A2) (Cont'd)
TM 9-2320-280-20-2
4-238.2
Change 2
