TM 9-2320-280-20-2
4-107. INTERCOM CABLE REPLACEMENT (M996, M996A1)
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Personnel Required
M996, M996A1
One mechanic
One assistant
Tools
General mechanic’s tool kit:
Manual References
automotive (Appendix B, Item 1)
TM 9-2320-280-24P
Materials/Parts
Equipment Condition
Lockwasher (Appendix G, Item 110)
Battery ground cable disconnected (para. 4-73).
Four nut and lockwasher assemblies
(Appendix G, Item 148)
Two tiedown straps (Appendix G, Item 241)
1.
2.
3.
4.
5.
6.
4-242
Remove two tiedown straps (3) from intercom cable (4), power cable (7) and two antenna cables (6).
Discard tiedown straps (3).
Remove capscrew (8), washer (1), clamp (2), two antenna cables (6), and intercom cable (4) from
radio rack (5).
Remove three screws (13), clamps (14), two antenna cables (6), and intercom cable (4) from wind-
shield (15).
Remove capscrew (9), washer (10), clamp (12), intercom cable (4), and two antenna cables (6) from
plate (11).
Remove two screws (22), clamps (23), and intercom cable (4) from body (17).
Remove two nut and lockwasher assemblies (16), capscrews (21), washers (20), grommet (18),
retainer (19), and intercom cable (4) from body (17). Discard nut and lockwasher assemblies (16).
