TM 9-2320-280-20-2
4-238
Change 2
4-106. ANTENNA CABLES REPLACEMENT (M997, M997A1, M997A2)
a. Removal
1.
Remove two tiedown straps (5) from antenna cables (7), power cable (8), and intercom cable (6).
Discard tiedown straps (5).
2.
Remove capscrew (1), washer (2), clamp (3), antenna cables (7), and intercom cable (6) from radio
rack (4).
3.
Remove three screws (10), clamps (11), antenna cables (7), and intercom cable (6) from
windshield (12).
4.
Remove capscrew (13), washer (14), clamp (9), antenna cables (7), and intercom cable (6) from
windshield (12) and plate (15).
INITIAL SETUP:
Applicable Models
_______________
M997, M997A1, M997A2
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
_____________
Two tiedown straps (Appendix G, Item 241)
Two lockwashers (old configuration only)
(Appendix G, Item 113)
Nut and lockwasher assembly
(old configuration only)
(Appendix G, Item 146)
Nut and lockwasher assembly
(old configuration only)
(Appendix G, Item 144.1)
Six nut and lockwasher assemblies
(new configuration only)
(Appendix G, Item 144.1)
Manual References
________________
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
__________________
• NBC door opened (TM 9-2320-280-10).
• Battery ground cable disconnected (para. 4-73).
This task covers:
a. Removal
b.
Installation
