TM 9-2320-280-20-2
4-105. ANTENNA CABLES REPLACEMENT (M996, M996A1)
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
M996, M996A1
TM 9-2320-280-24P
Tools
Equipment Condition
General mechanic’s tool kit:
Battery ground cable disconnected (para. 4-73).
automotive (Appendix B, Item 1)
Materials/Parts
Two tiedown straps (Appendix G, Item 240)
a. Removal
1. Remove two tiedown straps (6) from antenna cables (8), power cable (2), and intercom cable (7).
Discard tiedown straps (6).
2. Remove capscrew (3), washer (4), clamp (5), two antenna cables (8), and intercom cable (7) from
radio rack (1).
3. Remove three screws (11), clamps (10), two antenna cables (8) and intercom cable (7) from
windshield (12).
4. Remove capscrew (14), washer (13), clamp (9), two antenna cables (8) and intercom cable (7) from
plate (15) and windshield (12).
5. Remove two antenna cables (8) from antenna (16).
b. Installation
1. Install antenna cables (8) on antenna (16).
2. Install clamp (9) two antenna cables (8) and intercom cable (7) on plate (15) and windshield (12)
with washer (13) and capscrew (14). Tighten capscrew (14) 6 lb-ft (8 Nm).
3. Install three clamps (10), two antenna cables (8) and intercom cable (7) on windshield (12) with
three screws (11).
4. Install clamp (5), two antenna cables (8) and intercom cable (7) on radio rack (1) with washer (4) and
capscrew (3). (Tighten capscrew (3) 6 lb-ft (8 Nm).
5. Install two antenna cables (8) on intercom cable (7) and power cable (2) with two tiedown straps (6).
4-236
