TM 9-2320-280-20-2
4-87. CEILING LIGHT ASSEMBLY MAINTENANCE (Contd)
1. Remove two screws (5) and lens (6) from light assembly (4).
NOTE
For removal and installation of rivets, refer to para. 10-66.
2. Remove four rivets (7) from light assembly (4) and duct (1). Pull light assembly (4) away from
duct (1) to allow access to leads.
3. Disconnect two leads (3) from harness connectors (2). Remove light assembly (4).
1. Connect two leads (3) to harness connectors (2).
2. Install light assembly (4) to duct (1) with four rivets (7).
3. Install lens (6) to light assembly (4) with two screws (5).
FOLLOW-ON TASK: Check operation of ceiling light (TM 9-2320-280-10).
4-159