TM 9-2320-280-20-2
4-88. SPOTLIGHT ASSEMBLY MAINTENANCE
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
M996, M996A1, M997, M997A1, M997A2
TM 9-2320-280-10
TM 9-2320-280-24P
Tools
General mechanic’s tool kit:
Equipment Condition
automotive (Appendix B, Item 1)
Battery ground cable disconnected (para. 4-73).
Materials/Parts
Nut and lockwasher assembly
(Appendix G, Item 144)
NOTE
M996, M996A1, M997, M997A1, and M997A2 spotlight
replacements are basically the same. This procedure covers the
M996 and M996A1.
a. Removal
1. Remove four screws (8) and duct (7) from ceiling (1) and pull duct (7) away for access to clamp (5).
2. Remove screw (6), nut and lockwasher assembly (4), and clamp (5) from duct (7). Remove duct (7).
Discard nut and lockwasher assembly (4).
3. Disconnect spotlight leads (3) from harness leads (2). Remove light assembly (9) from quick
disconnect base (10).
b. Installation
1. Install light assembly (9) on quick disconnect base (10) and connect spotlight leads (3) to harness
leads (2).
2. Install clamp (5) on light assembly (9) and duct (7) with screw (6) and nut and lockwasher
assembly (4).
3. Install duct (7) on ceiling (1) with four screws (8).
4-160
