TM 9-2320-280-20-2
4-56. REAR COMPOSITE LIGHT ASSEMBLY REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Manual References
General mechanic’s tool kit:
TM 9-2320-280-10
automotive (Appendix B, Item 1)
TM 9-2320-280-24P
Materials/Parts
Equipment Condition
Four lockwashers (Appendix G, Item 111)
Battery ground cable disconnect (para. 4-73).
NOTE
Prior to removal, tag leads for installation.
a. Removal
1. Remove two capscrews (3), lockwashers (4), ground 95B (5), and ground strap (6) from
housing (17). Discard lockwashers (4).
2. Remove two capscrews (15) and lockwashers (16) and pull shield (1) away from “D” beam (14).
Discard lockwashers (16).
3. Remove screw (2), nut (12) and clamp (11) from shield (1).
4. Disconnect leads 21 (7), 23 (8),24 (9), and 22-461 (10) from body harness (13).
5. Remove composite light (18) from housing (17).
b. Installation
1.
Instad composite light (18) on housing (17).
2. Connect leads 21 (7), 23 (8),24 (9), and 22-461 (10) to body harness (13).
3. Install clamp (11) on shield (1) with screw (2) and nut (12).
4. Install shield (1) on “D” beam (14) with two capscrews (15) and lockwashers (16).
5. Install ground strap (6) and ground 95B (5) on housing (17) with two lockwashers (4) and capscrews (3).
4-92
