TM 9-2320-280-20-2
4-53. FRONT COMPOSITE LIGHT LAMP REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Manual References
General mechanic’s tool kit:
TM 9-2320-280-10
automotive (Appendix B, Item 1)
TM 9-2320-280-24P
Materials/Parts
Equipment Condition
Packing (Appendix G, Item 166)
Battery ground cable disconnect (para. 4-73).
Adhesive sealant (Appendix C, Item 10)
a. Removal
1. Loosen five retaining screws (1) and remove light door (2) and packing (5) from light body (3).
Discard packing (5).
2. Remove lamp (4).
3. Clean mating surface on light door (2) and light body (3). Remove sealant.
b. Installation
1. Install lamp (4).
NOTE
To prevent moisture from entering light assembly, tighten all
screws evenly.
2. Install packing (5) and light door (2) on light body (3) with five retaining screws (1).
3. Apply thin coat of sealant to seam between light body (3) and light door (2).
FOLLOW-ON TASKS: Connect battery ground cable (para. 4-73).
Check front composite light for-proper operation (TM 9-2320-280-10).
4-88
