TM 9-2320-280-20-2
4-59. MAIN LIGHT SWITCH REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Manual References
General mechanic’s tool kit:
TM 9-2320-280-10
automotive (Appendix B, Item 1)
TM 9-2320-280-24P
Materials/Parts
Equipment Condition
Lockwashers (Appendix G, Item 108)
Battery ground cable disconnect (para. 4-73).
a. Removal
1. Remove cannon plug (1) from main light switch (8).
2. Remove screw (6), lockwasher (5), top single position lever (4) and washer (7) from switch (8).
Discard lockwasher (5).
NOTE
Lower right lever must be raised to remove screw.
3. Remove four screws (3) from switch (8) and instrument panel (2).
4. Remove switch (8) from behind instrument panel (2).
b. Installation
1. With single position lever shaft (9) at top of switch (8), install switch (8) into hole in instrument
panel (2) with four screws (3).
2. Install washer (7) and top single position lever (4) to switch (8) with lockwasher (5) and screw (6).
3. Install cannon plug (1) to rear of switch (8).
4-96
