TM 9-2320-280-20-2
4-57. REAR COMPOSITE LIGHT LAMP REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Manual References
General mechanic’s tool kit:
TM 9-2320-280-10
automotive (Appendix B, Item 1)
TM 9-2320-280-24P
Materials/Parts
Equipment Condition
Packing (Appendix G, Item 167)
Battery ground cable disconnect (para. 4-73).
Adhesive sealant (Appendix C, Item 10)
a. Removal
1. Loosen six retaining screws (3) and remove composite light door (4) and packing (5) from composite
light (1). Discard packing (5).
2. Remove lamp (2).
3. Clean mating surface on light door (4) and composite light (1). Remove sealant.
b. Installation
1. Install lamp (2).
NOTE
To prevent moisture from entering light
screws evenly.
assembly, tighten all
2. Install packing (5) and composite light door (4) on composite light (1) with six screws (3).
3. Apply a thin coat of sealant to seam between composite light (1) and composite light door (4).
FOLLOW-ON TASKS: Connect battery ground cable (para. 4-73).
Check front composite light for proper operation (TM 9-2320-280-10).
4-94
